Hear from Our Customers
You’re not replacing your AC just to have cold air again. You’re doing it because the old system is costing you money every month it runs, breaking down at the worst times, and leaving rooms in your house uncomfortable no matter how low you set the thermostat.
A proper AC unit replacement in San Felipe, CA changes that. Modern systems use about 20% less energy than units over 10 years old, which translates to real savings—homeowners typically see around $670 less on their annual energy bills. That’s not marketing talk, that’s what newer SEER-rated equipment actually delivers.
You also stop paying for emergency repairs. Older systems break down more often, and those service calls add up fast. When you replace your air conditioner with a properly sized, professionally installed system, you get years of reliable cooling without the constant maintenance headaches. Your home stays comfortable, your utility bills drop, and you’re not wondering if the AC will make it through the next heatwave.
We’ve been handling home AC replacement in San Felipe, CA and throughout Santa Clara County since 1985. We’re a family-owned company—started by Ramiro’s father, continued when Ramiro took over in 2006. That’s 40 years of seeing what works, what doesn’t, and what actually holds up in this climate.
San Felipe sits in a county where summer heat isn’t optional to deal with, and the median home value is over $1.3 million. You need contractors who understand both the technical side and the stakes. We’re fully licensed and insured, and we’ve done enough installations here to know what systems fit different home layouts, what sizing mistakes to avoid, and how to handle the ductwork challenges that come up in older properties.
First, we come out and look at your current setup. We’re checking your ductwork, measuring your space, and figuring out what size system you actually need—not just swapping in the same tonnage as your old unit. A lot of homes are running oversized or undersized equipment because someone guessed instead of calculated. We use load calculations to get it right.
Once we know what you need, we walk you through your options. Different SEER ratings, different brands, different price points. We’ll tell you what the upfront cost difference is and what the energy savings look like over time so you can make the call that fits your budget and goals.
Installation day, we pull out the old system, install the new one, connect it to your existing ductwork (or upgrade ducts if needed), set up your thermostat, and make sure refrigerant levels and airflow are dialed in. We test everything before we leave. You’re not waiting days for follow-up adjustments—you get cold air that day, and we explain what we did so you’re not left guessing what happened.
Ready to get started?
When you hire us for air conditioning unit replacement in San Felipe, CA, you’re getting the full job—not just a new condenser dropped in your yard. We handle the outdoor unit, the indoor air handler or furnace connection, refrigerant lines, electrical hookups, thermostat setup, and ductwork connections. If your ducts are leaking or undersized, we’ll tell you upfront so you’re not losing efficiency before the system even runs.
We use industry-approved refrigerants that meet California’s environmental standards, durable copper tubing, and proper insulation on all lines. Every install gets a final system check to verify airflow, refrigerant charge, and thermostat calibration. You also get a free estimate before we start, and we offer 15% off for seniors and military families.
Santa Clara County has strict building codes and energy efficiency requirements. We’re up to date on those standards, and every replacement we do is permitted and inspected properly. You’re not dealing with shortcuts or code violations that come back to bite you later when you sell or refinance. We also offer 24/7 emergency service if something goes wrong outside business hours, though with a new system, that’s rare.
Most air conditioner replacements in San Felipe, CA run between $3,000 and $6,000, depending on the size of your home, the SEER rating you choose, and whether your ductwork needs any modifications. Higher-efficiency systems cost more upfront but save you more on monthly energy bills—sometimes hundreds of dollars a year.
If your ducts are damaged, undersized, or leaking, that adds to the cost. But skipping duct repairs means your new system won’t perform the way it should, and you’ll lose a lot of the efficiency you just paid for. We give you a free estimate that breaks down equipment, labor, and any extras so you know exactly what you’re paying for before we start.
There are also rebates available right now. California launched new incentives in late 2024—income-qualified homeowners can get up to $8,000 back for heat pump installations, and middle-income households can get up to $4,000. Federal tax credits add another $2,000, plus a $1,000 state rebate for high-efficiency systems. We’ll let you know what you qualify for.
If your system is over 12 to 15 years old and needs a major repair—like a compressor or coil replacement—you’re usually better off replacing it. Those repairs can cost $1,500 to $3,000, and you’re putting that money into equipment that’s already near the end of its lifespan. You’ll likely face another expensive fix within a year or two.
Also, if your energy bills keep climbing even though you’re not using the AC more, that’s a sign the system is losing efficiency. Older units work harder to cool your home, which means higher electric bills every month. A new system pays for itself faster when you factor in the energy savings and the repair costs you’re avoiding.
If the unit is under 10 years old and the repair is minor—like a capacitor, contactor, or thermostat issue—repair makes sense. But once you’re looking at frequent service calls or very expensive parts, replacement is the smarter financial move. We’ll walk you through the math so you can see the breakeven point.
It depends on your home’s square footage, insulation, window placement, ceiling height, and how much heat your house absorbs during the day. A proper load calculation factors in all of that—it’s not just square footage divided by some generic number. Oversized units cycle on and off too much, which wastes energy and doesn’t dehumidify well. Undersized units run constantly and never quite cool the house down.
Most homes in San Felipe, CA need anywhere from a 2-ton to 5-ton system, but that range is wide for a reason. A 1,500-square-foot home with great insulation and shade might need a 2.5-ton unit, while a 1,500-square-foot home with poor insulation and west-facing windows might need 3.5 tons. We measure and calculate instead of guessing.
Using the wrong size is one of the most common mistakes in AC replacement, and it kills efficiency and comfort. We use Manual J load calculations to get the sizing right, and we check your ductwork to make sure it can handle the airflow. If your ducts are sized for a smaller system, we’ll tell you what needs to change.
Most home AC replacements in San Felipe, CA take one day—usually six to eight hours depending on the complexity of the install. If your ductwork is in good shape and we’re doing a straightforward swap, we’re often done in a single visit. You’ll have cold air by the end of the day.
If we need to modify ducts, upgrade electrical panels, or install a new air handler in a tight space, it might take a day and a half. We’ll tell you the timeline upfront during the estimate so you can plan accordingly. We don’t drag jobs out—we show up with the equipment and crew needed to finish the work efficiently.
The process moves faster when you’ve already picked your system and we’ve confirmed everything during the estimate. We pull permits ahead of time if required, so we’re not waiting on approvals the day of installation. Once we start, we work straight through until the system is running and tested.
SEER ratings measure efficiency—the higher the number, the less energy the system uses to cool your home. In California, the minimum SEER for new systems is 14, but most homeowners in San Felipe, CA choose between 16 and 18 SEER for a good balance of upfront cost and long-term savings.
If you’re planning to stay in your home for a while and you run your AC heavily during summer, a higher SEER rating pays off faster. A 16 SEER system uses about 20% less energy than an older 10 SEER unit, which can save you $50 to $70 a month during peak cooling season. Over 10 years, that adds up to real money—often more than the difference in equipment cost.
If you’re on a tighter budget or you don’t use AC much, a 14 or 15 SEER system still gives you a big efficiency jump over your old unit without the premium price tag. We’ll show you the cost difference and the estimated payback period so you can decide what makes sense for your situation. There’s no one-size-fits-all answer—it depends on your usage and how long you plan to own the home.
Yes. We offer financing options to spread out the cost of your air conditioning unit replacement in San Felipe, CA, and we’ll help you navigate available rebates. California has aggressive incentive programs right now—income-qualified homeowners can get up to $8,000 for heat pump systems, and middle-income households qualify for up to $4,000. There’s also a federal tax credit worth up to $2,000 for high-efficiency heat pumps, plus a $1,000 California state rebate.
Some of these programs have waitlists or limited funding, so it’s worth applying sooner rather than later. We’ll let you know what’s currently available and what paperwork you need. The rebates can cut your out-of-pocket cost significantly, especially if you’re upgrading to a heat pump system that handles both heating and cooling.
We also offer a 15% discount for seniors and military families. Between financing, rebates, and discounts, most homeowners find a way to make a new system work within their budget—and the monthly energy savings help offset the payment if you’re financing. We’re upfront about all the costs and savings so you can make an informed decision.
Local Resources
Get Your Free HVAC Quote Today
Contact our friendly team today for a free estimate and experience the difference.
Company
Support
Useful Links
