Hear from Our Customers
You’re not just getting shingles nailed down. You’re protecting your home’s value, keeping your insurance company off your back, and stopping those energy bills from bleeding you dry every summer.
California’s sun is relentless. In Lake County, your roof takes a beating from UV exposure that cracks and fades shingles faster than in most other states. That’s why roofs here last 15-20 years instead of the 25-30 you might see elsewhere.
A proper roof replacement in Lick, CA means your home stays cooler without cranking the AC constantly. It means your insurance policy stays active instead of getting dropped like the 72,000+ California homeowners who’ve already gotten cancellation notices. It means you’re not scrambling during the next heavy rainfall season wondering if water’s going to start dripping through your ceiling.
When you invest in quality roof installation, you’re buying time, peace of mind, and protection that actually lasts.
We operate as a licensed roofing contractor serving Lick, CA and the surrounding Lake County area. We carry the proper C-39 roofing license California requires, plus full liability and workers’ compensation coverage.
What matters more than credentials is understanding what your roof deals with here. Lake County’s climate isn’t one-dimensional. You’ve got intense summer heat, seasonal heavy rainfall, and enough weather variation that your roof needs to handle it all without failing.
We’ve seen what happens when roofs get installed by contractors who don’t account for California’s specific challenges. Shingles that work fine in other states fail early here. Installation shortcuts that seem minor become major leaks during winter storms. That’s why we focus on materials rated for this climate and installation methods that actually hold up long-term.
First, we come out and actually look at your roof. Not a five-minute glance from the driveway. We’re talking about a real inspection that identifies what’s failing, what’s got life left, and what needs immediate attention.
You get a written estimate that breaks down materials, labor, timeline, and warranty coverage. No vague “we’ll figure it out later” pricing. You know what you’re paying for before we start.
Once you’re ready to move forward, we handle the permit process and schedule the work around your life, not just our convenience. During installation, we protect your property, manage job site safety so you’re not dodging nails in your driveway, and keep you updated on progress.
After installation, we walk the property with you to make sure everything’s clean and done right. You get warranty documentation for both materials and workmanship. Then we’re available if questions come up down the road.
The whole process typically takes a few days to a week depending on your roof’s size and complexity. Weather can affect timing, but we’re upfront about that from the start.
Ready to get started?
When you hire us as your roofer in Lick, CA, you’re getting materials specifically rated for California’s climate. That means shingles, underlayment, and flashing designed to handle UV exposure and temperature swings that destroy cheaper alternatives.
You’re getting proper ventilation that keeps your attic from turning into an oven every summer. Poor attic ventilation doesn’t just make your house hot, it cooks your roof from underneath and cuts its lifespan in half.
You’re getting installation that meets California’s building codes and insurance requirements. Those requirements exist because they prevent the failures that lead to claims. When your insurance company eventually asks about your roof, you’ll have documentation showing it was done right.
For Lake County specifically, we account for the area’s rainfall patterns. Your roof needs to shed water quickly during heavy storms without pooling or backing up under shingles. That requires proper slope calculation, quality underlayment, and flashing that actually directs water away from vulnerable areas.
You also get job site management that respects your property and your time. That means protecting landscaping, keeping debris contained, using magnetic rollers to pick up stray nails, and not blocking your driveway for days on end.
If your roof is over 15 years old in California, replacement is usually the smarter move even if it looks okay from the ground. The UV damage here is cumulative and invisible until shingles start failing.
Check for curling or cupping shingles, granules washing down your gutters, or dark streaks that indicate algae growth in moisture-damaged areas. If you’re seeing multiple problem areas across different sections of your roof, repairs become a temporary band-aid that delays the inevitable.
Insurance companies are getting aggressive about roof age. State Farm alone dropped over 72,000 California homeowners recently, many due to older roofs. If your roof was installed before 2010, you’re in the zone where insurers start asking questions. Replacing it proactively keeps your coverage intact instead of scrambling for new insurance with a roof that’s already flagged as high-risk.
The cost difference between patching problems for another few years versus replacing once often favors replacement when you factor in the insurance risk and energy waste from a degraded roof.
Asphalt shingles rated for high temperatures and UV resistance are the most common choice here because they balance cost with performance. Look for shingles with a Class A fire rating and impact resistance ratings, both important in California.
Cool roof technology makes a real difference in Lake County’s summer heat. These shingles reflect more sunlight instead of absorbing it, which can cut your cooling costs by 15% or more. They’re not exotic or expensive, just engineered differently than standard shingles.
Metal roofing is gaining ground in California because it lasts 40-50 years, reflects heat naturally, and handles fire risk better than any other material. The upfront cost runs higher at $20-27 per square foot versus $7-11 for quality asphalt, but you’re looking at potentially the last roof you’ll ever install.
Tile roofing works well here and you see it throughout California, but it’s heavy and requires your roof structure to handle the load. If your home wasn’t built for tile, retrofitting the support structure adds significant cost. Tile runs $8-15 per square foot and lasts 50+ years when installed correctly.
Most residential roof replacements in Lick, CA take 2-5 days depending on your home’s size, roof complexity, and weather. A straightforward single-story home with basic roof lines goes faster than a two-story with multiple valleys, skylights, and architectural details.
Expect noise. Roof tear-off and installation is loud, especially in the morning when crews start early to avoid working through the hottest part of the day. If you work from home or have young kids who nap, plan accordingly.
Your driveway will have a dumpster and materials staged nearby. We minimize disruption, but there’s no way around having equipment on-site. Pets should stay inside during the work, both for their safety and so they’re not stressed by strangers and noise.
You’ll see a lot of activity on day one when the old roof comes off. That’s the messiest phase. After that, installation moves methodically as new underlayment, shingles, flashing, and ventilation go in. We do a magnetic sweep of your property afterward to pick up stray nails, but you should still watch for them in the weeks following completion.
Insurance covers roof damage from covered events like storms, falling trees, or fire. It doesn’t cover wear and tear from age or lack of maintenance. That’s a critical distinction many homeowners miss.
If a winter storm damages your roof and you file a claim, your insurance adjuster will look at your roof’s age and condition. If it’s old and already deteriorating, they may only pay depreciated value instead of full replacement cost. That can leave you covering thousands out of pocket.
Some policies include “roof surface” endorsements that limit coverage on older roofs to actual cash value rather than replacement cost. Read your policy or call your agent to understand what you actually have. The difference can be $10,000+ on a claim.
Here’s what matters more: keeping your insurance active in the first place. California insurers are non-renewing policies on homes with roofs older than 15-20 years. Once you’re dropped, finding new coverage gets expensive fast. Replacing your roof before it becomes an insurance issue is often cheaper than dealing with policy cancellation and shopping for coverage with a roof that’s already flagged.
Quality asphalt shingle installation in California runs $7-11 per square foot for materials and labor. For an average 2,000 square foot roof, you’re looking at $14,000-22,000 depending on roof complexity, material choice, and current market conditions.
That price includes tear-off of your old roof, disposal, new underlayment, shingles, flashing, ventilation, and cleanup. It doesn’t include structural repairs if your decking is rotted or damaged, which you won’t know about until the old roof comes off.
Metal roofing costs more upfront at $20-27 per square foot but lasts twice as long as asphalt. Tile runs $8-15 per square foot. Those prices reflect California’s higher labor costs and stricter building code requirements compared to other states.
Financing options exist if paying cash upfront isn’t realistic. Many homeowners finance roof replacement through home equity lines, personal loans, or contractor financing programs. The monthly payment is often less than the energy savings and insurance risk you’re avoiding.
Get at least three written estimates before deciding. Make sure each estimate specifies materials by brand and grade, includes warranty terms, and breaks out what’s covered versus what might cost extra. The lowest bid isn’t always the best value when you factor in material quality and contractor reliability.
Yes. Roof replacement in California requires a building permit from Lake County. This isn’t optional red tape, it’s state law and your insurance company will want proof the work was permitted and inspected.
The permit process ensures your roof meets current building codes for wind resistance, fire rating, and structural load. Codes change over time, so what was acceptable when your old roof went on might not meet today’s standards. Permitted work brings everything up to current requirements.
We handle the permit application, not you. It’s part of doing business legally in California. The permit fee typically runs a few hundred dollars and gets rolled into your project cost. After installation, a county inspector comes out to verify the work was done correctly before signing off.
Skipping permits might save a few hundred dollars upfront, but it creates major problems later. Your insurance can deny claims on unpermitted work. You’ll have trouble selling your home when title companies discover unpermitted improvements. And if something goes wrong, you have no recourse because the contractor was operating illegally.
If a contractor suggests skipping permits to save money or time, that’s your signal to find someone else. Licensed contractors pull permits because they know the consequences of not doing it right.
Local Resources
Other Services we provide in Lick
Get Your Free HVAC Quote Today
Contact our friendly team today for a free estimate and experience the difference.
Company
Support
Useful Links
